| Type: | Compressor Oil |
|---|---|
| Source: | Liquid Mineral Lubricants |
| Composition: | Base Oil |
| Property: | Protective Lubricant |
| Shape: | Liquid |
| Application: | Automotive Lubricant |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier | Color | Light Yellow, Blue |
| Density at 20ºC | 1.05~1.08g/cm³ |
| Equilibrium Reflux Boiling Point | 260ºC |
| Wet Equilibrium Reflux Boiling Point | 165ºC |
| PH Value(50% EtOH) | 7~11.5 |
| Kinematic Viscosity At -40ºC[-40ºF] | 1350~1450mm²/s |
| Kinematic Viscosity At 100ºC[212ºF] | 1.8~2.4mm²/s |
| Water Content | < 1% |
BENEFITS:
Product information:
First, put the vehicle in the flameout state, open the lid of the brake fluid pot, and use a syringe to pump out all the brake fluid inside until it reaches the bottom of the tank. Fill in new brake fluid and avoid splashing. Finally, the level of the brake fluid should be observed. If it is lower than the lowest scale, it should be supplemented in time.
Notes:
The following points should be observed when handling brake fluids: Keep out of reach of children. Harmful if swallowed. If this occurs, seek medical advice or contact the poisons Information Centre. If splashed in the eyes, flood affected area with copious quantities of water for about 10 minutes. Seek medical advice immediately. Avoid contact with skin.Affected areas should be washed with mild soap and water. Dirt, grease and other foreign particles will affect the efficient operation of the brake system. Draw brake fluids directly from sealed containers. This reduces the possibility of moisture absorption. Reseal these containers immediately after use. Discard empty containers. Fluid held in partially filled containers should be discarded 12 months after opening.
STORAGE
Precautions for safe handling: Avoid all unnecessary exposure. Both local exhaust and general room ventilation are usually required. Handling temperature: <40ºC.Hygiene measures: Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Conditions for safe storage, including any incompatibilities Storage temperature <40ºC. Storage area: Store in dry, cool, well-ventilated area.
Zhejiang Guoneng Technology Co., Ltd was establish from 1992. Over 20 years professional manufacture experience, we become one of the largest Manufacture on Adhesive in Huzhou City Zhejiang China.
Our company covers an area of 22,000 square meters, including 800 square meters of laboratory and we have over 200 employees. We specialize in the production and distribution of adhesive products,and they're well approved by SGS, Reach, RoHs, BSCI, ISO9001:2000 etc. OEM and ODM are both welcomed.
We'd like to cooperate with customers from all over the world based on mutual-benefit. We always put "Customers First" in our mind and commit ourselves to providing high quality HPPP (Honest, Prompt, Precise, Professional) service to all reliable and esteemed international partners and clients.
Reply within 24 Hours
Professional consultation service is available within 24 hours after receiving your feedback regarding theiterms
that that you bought.
Global Insurance Service
Global insurance service guarantees the safety of iterms when installation and application.
Compensation Policy
Any quality problem caused by our company side with enough evidence, we promise you that if could bere-produced for free.
Contact us, you will get more than what you see !
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}