Visbella Easy Use 5 Second Fix UV Light Glue Pen for Glass, Plastic

• Customization: Available
• Application: Automobile, Construction, Woodworking, Footwear & Leather, Fiber & Garment, Packing
• Transport Package: Blister Card
• Model NO.: blister card
• Specification: 120pcs/carton
• Trademark: Visbella
• Origin: Zhejiang
• HS Code: 3506990000
• Production Capacity: 500000

Product Description

Product Description

UV light glue is a fast curing adhesive that can be used in daily repair. It is suitable for bonding metal, glass, ceramics, wood, rubber, PVC, ABS, Acrylic and so on. This product is cured when exposed to UV radiaiton . The speed of cure will depend on the UV intensity as measured at the product surface.The ultraviolet lamp can achieve cure within a short time, safe and convenient operation.

Benefits

Low Odor
No heating is required
Durable resin formula
Good for multiple repairs
Single ingredient - eliminates mixing
Safe for Use

Product Attribute

Appearance		Clear
Ordor		Acrylic
Vapor Pressure		< 6 mm Hg (27ºC (80.6ºF))
Boiling Point/range		> 149ºC (> 300.2 ºF)
Density(g/cm3)		1.04
Flash Point		65ºC (149ºF)
Viscosity(mpas)		>950
Hardness(shore A)		65-75
Shear Strength	Glass	≥ 15.0Mpa
Glass to Materials	Metal	≥ 11.0Mpa
	Aluminium	≥ 10.0Mpa
	Ceramic	≥ 7.50Mpa
	Acrylic Plastic	≥ 3.0Mpa
	ABS Plastic	≥ 3.0Mpa
	PVC Plastic	≥ 2.5Mpa
	Wood Plastic	≥ 2.5Mpa

 

 

HOW TO USE

Surfaces to be bonded should be clean and dry.
The plastic coating should be bonded to the site, gently press, plastic full of bonded joints, and then used with UV light irradiation, attention must use the built-in UV lamp. About 10 seconds will be able to achieve the early curing, if the adhesive area is too large, an appropriate extension of irradiation time.
Pay attention to the adhesive parts of at least one side is transparent, UV lamp alignment transparent side irradiation, light can through the surface, the adhesive curing.

 

NOTE

This product is light sensitive; exposure to daylight, UV light and artifical lighting should be kept to a minimum during storage and handling.
For best performance bond surfaces should be clean and free from grease.
Cure rate is dependent on lamp intensity, distance from light source, depth of cure needed or bondline gap and light transmittance of the substrate through which the radiation must pass.

STORAGE

Products should be stored unopened in a cool, dry place out of direct sunlight. Products should be kept at room temperature away from direct light. Protect from extreme heat or cold, do not refrigerate.

Production Line

 

Company Overview

Zhejiang Guoneng Technology Co., Ltd was establish from 1992. Over 20 years professional manufacture experience, we become one of the largest Manufacture on Adhesive in Huzhou City Zhejiang China.
 
Our company covers an area of 22,000 square meters, including 800 square meters of laboratory and we have over 200 employees. We specialize in the production and distribution of adhesive products,and they're well approved by SGS, Reach, RoHs, BSCI, ISO9001:2000 etc. OEM and ODM are both welcomed.
 
We'd like to cooperate with customers from all over the world based on mutual-benefit. We always put "Customers First" in our mind and commit ourselves to providing high quality HPPP (Honest, Prompt, Precise, Professional) service to all reliable and esteemed international partners and clients.

 

Certificates

 

After-Sales Service

Reply within 24 Hours

Professional consultation service is available within 24 hours after receiving your feedback regarding theiterms 

that that you bought.

Global Insurance Service

Global insurance service guarantees the safety of iterms when installation and application.

Compensation Policy

Any quality problem caused by our company side with enough evidence, we promise you that if could bere-produced for free.

Contact us, you will get more than what you see