Benefits
Repair dent ding by yourself, save your cost
No damage to car paint
Product Attribute
Appearance: |
Clear solid strip |
Odor: |
None |
Density (g/cm3): |
1±0.5 |
Softening temperature(ºC) |
65-135 |
Operate temperature (ºC) |
130-180 |
Melting time (mins) |
≥10 |
Surface cure time (mins) |
≥10 |
Full cure time (mins) |
≥3 |
HOW TO USE
1. Insert glue stick into glue gun, plug in the glue gun and let it warm up for 10-15 minutes before use.
2. Using clean cloth to clean dent area, then apply heated glue from glue gun to the center of the glue. Select one of the puller tab according to the dent to be treated, and stick it to the glue.
Attention: Puller tab must smaller than dent area and similar in shape. Keep the puller tab hold firmly for 10 seconds. Do not push excessively the puller tab against the dent!
3. Place puller bridge stand over the puller tab, setting adjusters to desired length. Screw the knob nut slowly, and continue to rotate until dent is raised. Stop when dent returns to normal surface level of the car body.
4. Unthread Knob nut and remove puller bridge stand and puller tab from treated surface.
Use the release agent in endowment to remove the dried glue from the surface. Then use the plastic scraper to peel off softened glue patch.
5. If a too high glue spot has been created, use a rubber hammer and lightly tap the Leveling pen against raised spot to remove. If the dent surface is big, repeat above step.
NOTE
1. Do not use on vehicles previously re-painted or plastered.
2. If the operating ambient temperature is lower than 5ºC (41ºF), use hair dryer blow puller tab and dent area before repairing (not less than 1 minute). This helps to strengthen the bond strength.
3. If the operating ambient temperature is higher than 30ºC (86ºF), use cold water spray on the dent area to cooling before repairing . This helps to strengthen the bond strength
STORAGE
Products shall be ideally stored in a cool, dry location in un-opened containers at a temperature between 5 to 25 degree, avoid sunlight.
Production Line
Company Overview
Huzhou Guoneng New Material Co., Ltd.has a construction area of more than 41,000 square meters. The company is a national high-tech enterprise integrating R&D, production and sales. Company has been adhering to the" peoplecentered, Science and Technology Innovation" development philosophy. GNT has strong technical reserves and R&D capabilities. Established a provincial-level post-doctoral scientific research work station and was rated as a provincial-level enterprise R&D center, and the leading science& technology talent enterprise, Green Factory and other honors.
The company's products are mainly used in automotive, new energy. defense industry,smart home and other fields. At present, it has more than 60 domestic and foreign patents. The company's own brand "visbella" has been registered in more than 160 countries in the world, and has established its own dealer network in more than 20 countries in the world.
Certificates
After-Sales Service
Reply within 24 Hours
Professional consultation service is available within 24 hours after receiving your feedback regarding theiterms
that that you bought.
Global Insurance Service
Global insurance service guarantees the safety of iterms when installation and application.
Compensation Policy
Any quality problem caused by our company side with enough evidence, we promise you that if could bere-produced for free.
Contact us, you will get more than what you see