Customization: | Available |
---|---|
Bonding Function: | Instant Adhesive |
Morphology: | Solvent |
Still deciding? Get samples of US$ 0.55/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Description | Specification |
Appearance: | Fine Paste |
Specific Gravity: | 1.03gm/ml |
Extrusion Rate (3.2 mm (1/8") orifice, 90 psi air pressure) g/minute: | 476 |
Sagging ( mm ): | 0 |
Flow Rate (sag or slump): | Nil |
Stretching Bonding: | Nil |
Tensile Modulus at 25°C (77°F) and 50% R.H: | 0.46 |
Tack-Free Time at 25°C (77°F) and 50% R.H. : | 5-10 min |
Cure Rate at 25°C(77°F) at 50% R.H. in 24 hour(mm): | 2.6 |
Hardness Shore A, points: | 28 |
How to Use
1.Make sure surfaces are clean and dry. Remove any soap, oil and grease.
2.Cut tip off cartridge, screw on nozzle. cut nozzle to desired opening at 45 angle.
3.For a smooth seal hold at 45 angle and apply bu pushing sealant ahead of nozzle.
4.If further caulking is required, complete within 5 mins, remove excess sealant immediately with dry paper towel cured plug.
Reply within 24 Hours
Professional consultation service is available within 24 hours after receiving your feedback regarding theiterms
that that you bought.
Global Insurance Service
Global insurance service guarantees the safety of iterms when installation and application.
Compensation Policy
Any quality problem caused by our company side with enough evidence, we promise you that if could bere-produced for free.
Contact us, you will get more than what you see